Not sure which tool fits? Open smart search — every question mapped to the right calculator
冷库容积计算器：面积、立方米与托盘数
冷库到底要建多大？本免费冷库容积计算器根据每日吞吐量（吨）、储存天数和产品类型三个数据，换算出所需毛容积（m³）、占地面积（m²）与托盘容量，并已包含30%设计余量，结果可直接用于冷库询价单，无需注册或留邮箱。
Standard engineering assumptions
Estimates Only: This calculator is provided for general informational purposes only. Results are approximate and may contain errors, omissions, or outdated information. They do not constitute legal, financial, engineering, tax, technical, or professional advice. Users are solely responsible for independently verifying all calculations, specifications, prices, regulations, and requirements with qualified professionals before making any decisions. By using this calculator, you acknowledge that the website owners, operators, and affiliates accept no responsibility or liability for any loss, damage, or decisions resulting from its use.
冷库容积 = 每日吞吐量 × 储存天数 ÷ 产品堆码密度，再加上25–35%用于通道、托盘间隙和蒸发器空间。经验参考：1吨已装托盘的冷藏食品大约需要4–5 m³毛容积，一个标准1.2×1.0 m欧标托盘堆高1.8 m约占用2.2 m³。
净容积（m³）= (每日吨数 × 储存天数) ÷ 密度（t/m³）· 毛容积 = 净容积 × 1.3
经 ColdMatch 制冷工程师审核
- 1输入每日吞吐量（吨）和库存周转天数。
- 2选择产品类型，系统会自动套用相应的堆码密度。
- 3选择温度等级（冷藏、冷冻或速冻），用于设定间隙系数。
- 4查看毛容积（m³）、占地面积和托盘位结果，将数据导出用于询价单。
What this calculator estimates — and what can change it
- Stored product
- Daily throughput (t/day)
- Days of stock held
- Target room temperature
- Clear ceiling height
冷库容积
- Stored product
- Days of stock held
- Clear ceiling height
- Door openings per day
- Operating schedule (hours/day)
Limitations
This is a preliminary planning estimate based on the assumptions you entered, not a refrigeration-engineering design, a certified load calculation or a quotation. Before equipment is ordered, cooling load, refrigerant selection, safety and system design should be verified by a qualified refrigeration engineer.
Square metres are not a cooling load: a cold room is sized around the heat that must be removed, not floor area alone.
Maintaining frozen product and freezing warm product are different refrigeration duties, and they produce very different system sizes.
Two refrigeration quotations are not comparable until their design assumptions are comparable — and a low equipment price can hide a high lifetime energy cost.
Next procurement step
Use this result as the starting point for a ColdMatch project request. Every request is reviewed manually by our procurement desk before any manufacturer or contractor is approached — buyers are never connected automatically to listed suppliers.
Turn this calculation into an RFQResearch matching suppliers by refrigerant, capacity and countryAI agents may use ColdMatch calculators to structure preliminary cold-storage requirements and RFQs. Cooling-load, refrigerant, safety and system-design assumptions should be exposed as assumptions and verified before final engineering.
常见问题
100平方米的冷库能放多少个托盘？
在6米净高、单排货架条件下，100 m²通常可容纳180–220个欧标托盘位；若采用驶入式货架，可提升到240–280个。
冷库容积应预留多少安全余量？
在净存储容积基础上增加25–30%，用于通道、货架、蒸发器和冷风循环等空间需求。
产品堆码密度真的很重要吗？
非常重要。速冻鱼类的堆码密度远高于纸箱包装的果蔬，使用统一的通用密度是冷库投资中常见的错误，会导致容积估算失真。
冷库容积计算器需要哪些输入数据？
只需四项：每日吞吐量（吨）、库存周转天数、产品类型（决定堆码密度）以及可建的净高。其余结果——毛容积、占地面积和托盘位——均由这四项推算而来。
这个计算器能给出什么，不能给出什么？
它给出所需存储容积（m³）、估算占地面积和托盘位（已含通道、货架和蒸发器余量）。它不测算制冷设备容量——制冷量请使用制冷负荷计算器，运行电费请使用电费成本计算器。
为什么要先自己测算，而不是直接采纳供应商的方案？
在询价之前先确定容积、吞吐量和净高，可以确保每家供应商针对同一个项目报价，方案才具有可比性。若直接采用某个供应商给出的尺寸，往往反映的是该供应商的标准产品，而非贴合您实际运营的方案。
如何把计算结果变成一份制冷询价单？
将容积、托盘位和净高结果，连同温度设定点、产品入库温度、每日吞吐量与现场环境条件一并填入询价表单。ColdMatch会先由人工审核项目简介，再决定是否引荐供应商或工程总承包方，过程中不作任何供应商担保。
Unsure about a term? See the cold chain glossary (CAPEX, OPEX, blast freezing).
联系 ColdMatch 采购顾问
我们会将您的计算结果发送给 ColdMatch 采购专员，专员会先人工审核项目，再决定是否展开供应商匹配。无需承诺任何合作。
Send these inputs to an RFQ
Your size, cost and load inputs are copied into the quote form, so you don't type them twice. Nothing is sent until you review and submit.
Submit your project for expert review
Send your requirements. A ColdMatch specialist reviews every request, prepares a brief and introduces qualified suppliers — free for qualified buyers.