What electricity price does this Colombia calculator use?

It starts from an indicative industrial electricity tariff for Colombia in USD/kWh, which you can overwrite with your own contracted rate. Tariffs vary by region, connection size and demand charges, so your real bill will differ.

How is the local climate applied?

A typical summer design peak temperature for Colombia is used to uplift refrigeration energy and to increase the condenser and compressor capacity assumed in the CAPEX figure. Hotter design conditions raise both numbers.

Why is standby generation included?

Where grid outages are common, generator fuel is a genuine running cost, not a contingency. The model assumes a country-typical number of generator hours per year and prices the diesel accordingly.

No. It is an indicative budgeting model for early project scoping. It is not engineering design, not a supplier quotation, not financial advice and not a regulatory assessment. ColdMatch reviews each project brief before approaching suppliers.

What project size does ColdMatch support in Colombia?

ColdMatch works on commercial and industrial cold-chain projects, typically from USD 250,000 upwards. Smaller scoping exercises are still welcome, but the platform is not for domestic appliance repair or consumer air conditioning.

Offline — reconnect before saving or submitting. Changes on this page have not been sent.

Not sure which tool fits? Open smart search — every question mapped to the right calculator

Colombia planning tool

Colombia Cold Storage CAPEX & OPEX Calculator

An indicative capital and annual running-cost model for commercial cold rooms, freezer stores and cold warehouses in Colombia — cold rooms, freezer stores, blast freezing and refrigerated warehousing for commercial and industrial projects. It applies local electricity pricing, design ambient conditions, humidity, grid reliability, local diesel pricing and installation cost levels instead of a generic global average.

Indicative industrial tariff

USD 0.13 / kWh

Typical band USD 0.10–0.18

Design ambient peak

33 °C

Hot and humid — higher defrost energy and infiltration load

Installation cost index

0.98×

Service & spares index 0.95×

Grid reliability

Occasional outages — standby generation strongly recommended

~200 generator hours/year · diesel USD 1.10/L

Latin America · Flower, fruit and fish export chains; altitude differences between sites change design ambient sharply.

Project inputs

Refrigerated volume (m³)

Temperature class

Refrigeration system

Site status

Redundancy level

Plant efficiency

Door / throughput traffic

Electricity tariff (USD/kWh) — Colombia default 0.13

Operations and maintenance staff (FTE)

Backup generator and transfer equipmentTemperature monitoring, alarms and loggingRacking / automation package (AS-RS, shuttles, WMS)On-site solar offsetting ~18% of annual consumption

Indicative CAPEX in Colombia

Envelope, plant & installation

USD 1,397,080

Backup power

USD 118,752

Monitoring & alarms

USD 9,800

Automation / racking

Not included

Total indicative CAPEX

USD 1,525,632

Cost per m³

USD 610

Planning range: USD 1,220,505 – USD 1,983,321, reflecting building condition, ground works, electrical infrastructure and Colombia installation rates.

This sits inside the USD 250,000+ commercial project range ColdMatch supports.

Indicative annual OPEX in Colombia

Average refrigeration load

147 kW

Grid electricity

1,288,544 kWh

Electricity cost

USD 167,511

Standby generation (200 h/yr)

USD 7,702

Maintenance & spares

USD 46,379

Labour

USD 53,200

Monitoring & compliance

USD 3,990

Total annual OPEX

USD 278,782

Planning range: USD 236,965 – USD 334,538. Energy (electricity plus fuel) accounts for about 63% of the annual cost at these inputs — USD 112 per m³ per year.

Turn this Colombia budget into a supplier-ready RFQ so quotations cover the same scope, redundancy and documentation.

Get free supplier quotes Explore financing options

ColdMatch Group is a supplier-neutral procurement platform — not a manufacturer, contractor or lender.

Assumptions and limitations

Electricity tariff and design ambient are indicative country averages, editable by you.
Generator hours reflect typical grid reliability, not your site's measured outage record.
Not financial advice, not a financing offer and not a supplier quotation.
Not engineering or refrigeration design; no equipment is sized.
Excludes land, permits, duties, taxes, financing costs and working capital.
Final numbers require supplier, engineer and local regulatory review.

Global CAPEX Estimator Global OPEX Estimator Cold Room CAPEX Guide Cold Storage OPEX Guide

Compare other markets

Latin America markets modelled with the same engine and their own tariffs, design ambient and grid assumptions.

Ecuador Peru Brazil Mexico Chile Argentina Nigeria Kenya Ghana Saudi Arabia Oman Iraq India Bangladesh All cold-chain project markets

Country cost briefs

Cold Storage Cost by Country: How Budgets Change Between Markets Electricity Tariffs and Cold Storage Running Cost by Country Designing Cold Storage for Hot Climates: 40 °C+ Markets Cold Storage on Unstable Grids: Backup Power and Fuel Budgets Seafood Blast Freezing for Export: Country Planning Guide Pharma Cold Chain by Country: GDP Requirements and Budget Impact CO2 and Ammonia Retrofits in Europe and North America Cold Warehouse Automation in High Labour-Cost Markets

Estimates Only: This calculator is provided for general informational purposes only. Results are approximate and may contain errors, omissions, or outdated information. They do not constitute legal, financial, engineering, tax, technical, or professional advice. Users are solely responsible for independently verifying all calculations, specifications, prices, regulations, and requirements with qualified professionals before making any decisions. By using this calculator, you acknowledge that the website owners, operators, and affiliates accept no responsibility or liability for any loss, damage, or decisions resulting from its use.

Buyer questions

What electricity price does this Colombia calculator use?: It starts from an indicative industrial electricity tariff for Colombia in USD/kWh, which you can overwrite with your own contracted rate. Tariffs vary by region, connection size and demand charges, so your real bill will differ.
How is the local climate applied?: A typical summer design peak temperature for Colombia is used to uplift refrigeration energy and to increase the condenser and compressor capacity assumed in the CAPEX figure. Hotter design conditions raise both numbers.
Why is standby generation included?: Where grid outages are common, generator fuel is a genuine running cost, not a contingency. The model assumes a country-typical number of generator hours per year and prices the diesel accordingly.
Is this a quotation?: No. It is an indicative budgeting model for early project scoping. It is not engineering design, not a supplier quotation, not financial advice and not a regulatory assessment. ColdMatch reviews each project brief before approaching suppliers.
What project size does ColdMatch support in Colombia?: ColdMatch works on commercial and industrial cold-chain projects, typically from USD 250,000 upwards. Smaller scoping exercises are still welcome, but the platform is not for domestic appliance repair or consumer air conditioning.

Indicative planning figures only — final sizing belongs to the supplier's detailed design. Request comparable supplier quotes · all cold chain tools · common cold chain questions

Send these inputs to an RFQ

Your size, cost and load inputs are copied into the quote form, so you don't type them twice. Nothing is sent until you review and submit.

Free for buyers, no obligation. These figures are estimates, not quotes — our team reviews your request and contacts suitable suppliers on your behalf.

From the blogRead the guide behind this calculator

Project request

Submit your project for expert review

Send your requirements. A ColdMatch specialist reviews every request, prepares a brief and introduces suitable suppliers — free for buyers.

Calculation method

1. Facility CAPEX = volume × central temperature-class rate × market factor
2. Options add backup generation (higher where grid risk is high), monitoring and automation
3. Energy = volume × benchmark kWh/m³·yr × market tariff (optionally reduced by solar)
4. Annual OPEX = energy + maintenance (% of plant CAPEX) + staff

Calculations run in SI (m, m², m³, kW, kg, °C). Imperial equivalents: 1 m² = 10.76 ft², 1 m³ = 35.31 ft³, 1 kW = 3,412 BTU/h = 0.284 TR, 1 t = 2,205 lb, °F = °C × 1.8 + 32.

Worked example

Default 2,500 m³ frozen store, checked against the central baseline.

Inputs

• 2,500 m³ (88,300 ft³)
• Frozen −18…−25 °C
• Market tariff (pre-filled per country)

Calculation

• Turnkey frozen: 2,500 × USD 400–1,150 = USD 1.0M–2.875M before market factor
• Energy: 2,500 × 55–95 = 137,500–237,500 kWh/yr
• Maintenance: 2–4% of plant CAPEX per year

≈ USD 1.0–2.9M turnkey and 137,500–237,500 kWh/yr before local adjustment.

Limitations

• Market factors are local adjustments to the central baseline, not independent price lists.
• Tariffs change; enter your contracted rate for a real comparison.
• Excludes land, building shell, import duty and taxes.

Illustrative planning result only. Confirm the final design, duty, equipment selection and performance with a qualified refrigeration engineer and supplier quotation.

Follows the ColdMatch calculation standard: method, worked example, limitations and imperial units.