ColdMatch Group — industrial cooling and cold chain procurement platform
ColdMatchGroup
Sign in
Cold-chain project financing.Financing

Offline — reconnect before saving or submitting. Changes on this page have not been sent.

Not sure which tool fits? Open smart search — every question mapped to the right calculator

Bangladesh planning tool

Bangladesh Cold Storage CAPEX & OPEX Calculator

An indicative capital and annual running-cost model for commercial cold rooms, freezer stores and cold warehouses in Bangladesh — seafood freezing and pharmaceutical cold storage. It applies local electricity pricing, design ambient conditions, humidity, grid reliability, local diesel pricing and installation cost levels instead of a generic global average.

Indicative industrial tariff
USD 0.11 / kWh
Typical band USD 0.08–0.15
Design ambient peak
38 °C
Hot and humid — higher defrost energy and infiltration load
Installation cost index
0.88×
Service & spares index 0.85×
Grid reliability
Frequent outages — continuous standby generation is a design requirement
~1300 generator hours/year · diesel USD 1.00/L

South Asia · High humidity plus grid instability means both defrost strategy and standby generation must be priced in from day one.

Project inputs

Indicative CAPEX in Bangladesh

Envelope, plant & installation
USD 1,304,088
Backup power
USD 143,450
Monitoring & alarms
USD 8,800
Automation / racking
Not included
Total indicative CAPEX
USD 1,456,338
Cost per m³
USD 583

Planning range: USD 1,165,070 – USD 1,893,239, reflecting building condition, ground works, electrical infrastructure and Bangladesh installation rates.

This sits inside the USD 250,000+ commercial project range ColdMatch supports.

Indicative annual OPEX in Bangladesh

Average refrigeration load
162 kW
Grid electricity
1,419,583 kWh
Electricity cost
USD 156,154
Standby generation (1300 h/yr)
USD 50,139
Maintenance & spares
USD 39,612
Labour
USD 47,600
Monitoring & compliance
USD 3,570
Total annual OPEX
USD 297,076

Planning range: USD 252,514 – USD 356,491. Energy (electricity plus fuel) accounts for about 69% of the annual cost at these inputs — USD 119 per m³ per year.

Turn this Bangladesh budget into a supplier-ready RFQ so quotations cover the same scope, redundancy and documentation.

Get free supplier quotes Explore financing options

ColdMatch Group is a supplier-neutral procurement platform — not a manufacturer, contractor or lender.

Assumptions and limitations

  • Electricity tariff and design ambient are indicative country averages, editable by you.
  • Generator hours reflect typical grid reliability, not your site's measured outage record.
  • Not financial advice, not a financing offer and not a supplier quotation.
  • Not engineering or refrigeration design; no equipment is sized.
  • Excludes land, permits, duties, taxes, financing costs and working capital.
  • Final numbers require supplier, engineer and local regulatory review.
Bangladesh cold-chain projectsGlobal CAPEX EstimatorGlobal OPEX EstimatorCold Room CAPEX GuideCold Storage OPEX Guide

Compare other markets

South Asia markets modelled with the same engine and their own tariffs, design ambient and grid assumptions.

IndiaPakistanSri LankaNigeriaKenyaGhanaSaudi ArabiaOmanIraqEcuadorPeruAll cold-chain project markets

Country cost briefs

Cold Storage Cost by Country: How Budgets Change Between MarketsElectricity Tariffs and Cold Storage Running Cost by CountryDesigning Cold Storage for Hot Climates: 40 °C+ MarketsCold Storage on Unstable Grids: Backup Power and Fuel BudgetsSeafood Blast Freezing for Export: Country Planning GuidePharma Cold Chain by Country: GDP Requirements and Budget ImpactCO2 and Ammonia Retrofits in Europe and North AmericaCold Warehouse Automation in High Labour-Cost Markets

Estimates Only: This calculator is provided for general informational purposes only. Results are approximate and may contain errors, omissions, or outdated information. They do not constitute legal, financial, engineering, tax, technical, or professional advice. Users are solely responsible for independently verifying all calculations, specifications, prices, regulations, and requirements with qualified professionals before making any decisions. By using this calculator, you acknowledge that the website owners, operators, and affiliates accept no responsibility or liability for any loss, damage, or decisions resulting from its use.

Buyer questions

What electricity price does this Bangladesh calculator use?
It starts from an indicative industrial electricity tariff for Bangladesh in USD/kWh, which you can overwrite with your own contracted rate. Tariffs vary by region, connection size and demand charges, so your real bill will differ.
How is the local climate applied?
A typical summer design peak temperature for Bangladesh is used to uplift refrigeration energy and to increase the condenser and compressor capacity assumed in the CAPEX figure. Hotter design conditions raise both numbers.
Why is standby generation included?
Where grid outages are common, generator fuel is a genuine running cost, not a contingency. The model assumes a country-typical number of generator hours per year and prices the diesel accordingly.
Is this a quotation?
No. It is an indicative budgeting model for early project scoping. It is not engineering design, not a supplier quotation, not financial advice and not a regulatory assessment. ColdMatch reviews each project brief before approaching suppliers.
What project size does ColdMatch support in Bangladesh?
ColdMatch works on commercial and industrial cold-chain projects, typically from USD 250,000 upwards. Smaller scoping exercises are still welcome, but the platform is not for domestic appliance repair or consumer air conditioning.

Indicative planning figures only — final sizing belongs to the supplier's detailed design. Request comparable supplier quotes · all cold chain tools · common cold chain questions

Send these inputs to an RFQ

Your size, cost and load inputs are copied into the quote form, so you don't type them twice. Nothing is sent until you review and submit.

Free for buyers, no obligation. These figures are estimates, not quotes — our team reviews your request and contacts suitable suppliers on your behalf.

From the blogRead the guide behind this calculator
Project request

Submit your project for expert review

Send your requirements. A ColdMatch specialist reviews every request, prepares a brief and introduces suitable suppliers — free for buyers.

Calculation method

  1. 1. Facility CAPEX = volume × central temperature-class rate × market factor
  2. 2. Options add backup generation (higher where grid risk is high), monitoring and automation
  3. 3. Energy = volume × benchmark kWh/m³·yr × market tariff (optionally reduced by solar)
  4. 4. Annual OPEX = energy + maintenance (% of plant CAPEX) + staff

Calculations run in SI (m, m², m³, kW, kg, °C). Imperial equivalents: 1 m² = 10.76 ft², 1 m³ = 35.31 ft³, 1 kW = 3,412 BTU/h = 0.284 TR, 1 t = 2,205 lb, °F = °C × 1.8 + 32.

Worked example

Default 2,500 m³ frozen store, checked against the central baseline.

Inputs

  • • 2,500 m³ (88,300 ft³)
  • • Frozen −18…−25 °C
  • • Market tariff (pre-filled per country)

Calculation

  • • Turnkey frozen: 2,500 × USD 400–1,150 = USD 1.0M–2.875M before market factor
  • • Energy: 2,500 × 55–95 = 137,500–237,500 kWh/yr
  • • Maintenance: 2–4% of plant CAPEX per year

≈ USD 1.0–2.9M turnkey and 137,500–237,500 kWh/yr before local adjustment.

Limitations

  • • Market factors are local adjustments to the central baseline, not independent price lists.
  • • Tariffs change; enter your contracted rate for a real comparison.
  • • Excludes land, building shell, import duty and taxes.

Illustrative planning result only. Confirm the final design, duty, equipment selection and performance with a qualified refrigeration engineer and supplier quotation.

Follows the ColdMatch calculation standard: method, worked example, limitations and imperial units.