Modular cold storage — prefabricated, containerized and rapid-deploy
Modular and containerized cold storage delivers pallet capacity in weeks, not months. ColdMatch sources prefabricated cold rooms, reefer conversions and modular refrigerated warehouses worldwide — buyable outright or financed.
What ColdMatch delivers
- 20 ft / 40 ft containerized cold rooms and freezers
- Prefabricated modular cold storage from 50 to 5,000 m³
- Multi-temperature modular units for chilled + frozen split
- Solar-ready and off-grid modular cold rooms for remote sites
- Purchase, lease-to-own and rental options via ColdMatch financing partners
You submit one RFQ. Our team handles the supplier outreach.
There is no direct buyer-to-supplier connection. Your request comes to the ColdMatch team, which contacts suitable suppliers and manufacturers on your behalf. Supplier and manufacturer information on this site is for research only; it is not a contact directory and does not mean a supplier has been vetted.
- You build your project and submit an RFQ.
- The ColdMatch team validates and organizes the requirements.
- We contact suitable suppliers and manufacturers for you.
- We present their organized responses to you through ColdMatch.
Supplier and manufacturer information is provided for research only; it is not a directory for direct contact. There is no direct buyer-to-supplier connection: every RFQ comes to the ColdMatch team, which validates it, contacts suitable suppliers on the buyer's behalf and presents organized responses through ColdMatch.
What is a modular cold room?
A modular cold room is built from prefabricated insulated sandwich panels with cam-lock joints, assembled on a prepared slab and fitted with a matched refrigeration unit. Unlike a poured or built-in cold store, it can be extended, reconfigured or dismantled and relocated. Typical sizes run from 6 m³ walk-ins to multi-hundred-m³ panel-built stores inside an existing warehouse shell.
Modular or conventional construction — how do I choose?
Choose modular when the building shell already exists, the schedule is tight, capacity may change, or the site is remote and site labour is scarce. Choose conventional construction for very large high-bay stores where panel spans, racking-clad walls and long-term thermal performance justify a purpose-built envelope. Modular wins on speed and flexibility; conventional wins on scale.
What panel specification does a modular cold room need?
Chilled duty (0 to +5 °C) typically uses 80–100 mm PIR or PUR panels; frozen duty (-18 to -25 °C) usually 150–200 mm, thicker in hot ambients. Specify core type (PIR for fire performance, PUR for cost, mineral wool where fire rating governs), facing steel thickness and coating, joint and vapour-seal detail, and floor insulation with an under-slab heater for frozen rooms to prevent frost heave.
How fast can a modular cold store be installed?
Panel manufacture is usually 3–6 weeks, shipping 1–6 weeks depending on route, and on-site assembly of a mid-size room 1–3 weeks including refrigeration installation and commissioning. Slab preparation, drainage and power are the usual critical path items, not the panels themselves.
- •6–50 m³ walk-in modular cold room
- •50–500 m³ modular store inside an existing warehouse
- •Multi-room modular chilled and frozen suite with airlock
- •Relocatable modular capacity bridging a permanent build
Exact system sizing depends on required temperature, ambient climate, product load and turnover rate, door openings, insulation specification, storage duration, redundancy level and operating hours. ColdMatch does not manufacture equipment — we help industrial buyers compare suitable suppliers and technologies against project-specific technical and commercial requirements.
- •Country, project location and site status (greenfield or existing building)
- •Application and product stored or processed
- •Required temperature range and any humidity requirement
- •Storage capacity (m², m³ or pallet positions) and daily throughput
- •Ambient/design climate conditions at site
- •Available power supply and backup or redundancy requirement
- •Preferred refrigerant, if already defined by policy or regulation
- •Indicative budget range and target commissioning date
- •Internal dimensions and clear height available in the shell
- •Slab condition, drainage and whether floor insulation is required
- •Door type and traffic (personnel, pallet, strip curtain, dock)
- •Whether the room must be relocatable or extendable later
Frequently asked questions
How ColdMatch Group works — independent B2B procurement and sourcing platform — ColdMatch Group is an independent B2B procurement and sourcing platform for industrial refrigeration, cold storage and cold-chain projects from USD $250K+, where the ColdMatch team reviews each buyer brief, contacts suitable third-party suppliers on the buyer's behalf and organizes their responses.
Explore every ColdMatch buying guide
RFQ checklist, cost benchmarks, and country-by-country buying guides — all in one hub.
Back to Guides HubTake this to a structured cold storage RFQ
Suppliers quote accurately only when capacity, temperature bands, throughput and site conditions are defined. Use the qualification guidance first, then issue one comparable RFQ.
Supplier-neutral. Free for buyers and project owners. Best suited to commercial projects from USD $250,000.