ColdMatch Group — industrial cooling and cold chain procurement platform
ColdMatchGroup
Sign in
Cold-chain project financing.Financing

Offline — reconnect before saving or submitting. Changes on this page have not been sent.

Supplier Knowledge Center

Industrial Process Chiller Suppliers

Industrial process chillers deliver chilled water or glycol to process users — food/pharma production, plastics, brewing, data centres and HVAC. In cold chain they often integrate with secondary-loop cold storage and pre-cooling systems. Selection drives efficiency, resilience and maintenance cost.

Human Global Expert Guidance•Vendor-Neutral Procurement•Team-Led Supplier Outreach•Commercial Confidentiality
Talk to a cold-chain expert on WhatsApp
Get Free Quotes — Prefilled RFQ Equipment Intelligence
  • Scroll, screw, magnetic-bearing centrifugal and absorption architectures
  • Duty range 20 kW to 5+ MW per unit
  • Air- or water-cooled; low-GWP refrigerants standard on new units
  • IPLV / ESEER selection for part-load efficiency
Section 1

Selection criteria

Part-load efficiency (IPLV/ESEER), not just full-load COP.Open Refrigerant strategy and F-gas exposure horizon.Open Redundancy: N, N+1, N+2 based on process criticality.Open Serviceability, spare-parts availability, local network.Open
Section 2

Engineering considerations

ΔT selection — 6 °C vs 10 °C changes pipework and pump energy dramatically.Open Free-cooling / integrated economiser for temperate climates.Open Water treatment programme for open condenser loops.Open Vibration and noise limits, especially near production.Open
Section 3

Commercial considerations

Long-form warranty on the compressor (5–10 years) for high-value duty.Open Preventive-maintenance contract with SLA on response time.Open Refrigerant custody and future retrofit pathway.Open
Section 4

Common mistakes

Sizing at design ambient only — misses the 6,000+ hours of part-load duty.Open One large chiller for critical duty — no redundancy path.Open Ignoring free-cooling potential in cool climates.Open
Section 5

Typical RFQ inputs

Peak and average duty; supply/return temperatures; ambient profile.Open Redundancy target, refrigerant preference, controls integration.Open Noise class, footprint constraints, spare-parts inventory scope.Open
Section 6

Handover requirements

Factory acceptance test (FAT) at design and part-load points.Open Site acceptance test (SAT) with performance witnessing.Open Refrigerant log, warranty registration, O&M documentation.Open
Section 7

Next resources

Start a vendor-neutral RFQRoute your project to shortlisted suppliers.Open Generate a project roadmapAuto-build scope, checklist and RFQ.Open Open the Planning CenterEvery planning calculator in one hub.Open Explore project financingPrivate, DFI and PPP routes.Open More in the Supplier Knowledge CenterBrowse the full center.Open
FAQ

Supplier Knowledge Center — frequently asked

How ColdMatch Group works — independent B2B procurement and sourcing platform — ColdMatch Group is an independent B2B procurement and sourcing platform for industrial refrigeration, cold storage and cold-chain projects from USD $250K+, where the ColdMatch team reviews each buyer brief, contacts suitable third-party suppliers on the buyer's behalf and organizes their responses.

Related answers
Next steps

Next steps for your supplier knowledge center project

Start an RFQRoute the project to suitable suppliers.Open Planning CenterEvery planning tool in one hub.Open Projects & Investment HubBrowse every project category.Open Back to Supplier Knowledge CenterAll entries in this center.Open
Project-first

Plan the supplier knowledge center project before choosing suppliers

Complete cold-chain outcomes depend on planning, budget realism, timeline discipline and neutral bid comparison — not on picking equipment first.

Project planning checklist

Cover the fundamentals before you brief suppliers.

  • ·Define capacity, temperature bands and throughput
  • ·Confirm site, power, water and permits
  • ·Choose refrigerant strategy and automation level
  • ·Set redundancy, monitoring and validation targets
  • ·List required certifications (GDP, HACCP, BRC, ISO)
  • ·Agree budget envelope and financing route
Full planning checklist (download)Infrastructure Builder

Budget factors

What actually moves the number on a commercial cold-chain project.

  • ·Refrigeration plant + refrigerant choice
  • ·Panels, envelope, floors, doors and structure
  • ·Racking, MHE and automation level
  • ·Controls, monitoring, alarms and BMS
  • ·Redundancy (N, N+1, 2N) and validation
  • ·Country, logistics, duties and installation labour
Budget planning guideCost benchmarksFinancing routes

Typical project timeline

Rule-of-thumb schedule for a commercial cold-chain project.

  1. FEED, scope, RFQ2–4 months
  2. Bid review, contracting1–2 months
  3. Procurement + long-lead3–6 months
  4. Civils, installation4–10 months
  5. Commissioning, validation1–3 months
Project planning guideMaster Planner

Common mistakes to avoid

Recurring patterns across hundreds of cold-chain briefs.

  • ·Buying equipment before defining the project
  • ·Under-sizing refrigeration load and standby
  • ·Skipping commissioning, validation and training
  • ·Single-source without a neutral bid comparison
  • ·Ignoring refrigerant regulation and phase-out
  • ·Treating financing as an afterthought
Commercial risk guideRefrigerant phase-out guide
Related resources

Continue the supplier knowledge center project

Project Builders (15 verticals)
Preset the Infrastructure Builder by industry.
Start a neutral RFQ
Structured brief to shortlisted suppliers.
Equipment Intelligence
Compare technologies before buying.
Procurement Academy
Incoterms, FAT/SAT, factory inspection.
Global Project Map
Reference projects worldwide.
Trust Center
How ColdMatch stays supplier-neutral.

ColdMatch Group is the specialized cold-chain platform of Global B2B Group — the worldwide B2B procurement and project ecosystem.

Brief the market on your supplier knowledge center project

One structured RFQ, vendor-neutral to shortlisted suppliers. Prefilled with pillar context — you refine the details. No commitment, no fees.

Compare Suppliers — Prefilled RFQ
Qualify, then request quotes

Take this to a structured refrigeration RFQ

Refrigeration bids are only comparable when refrigerant, duty, evaporating temperature, redundancy and controls are specified. Qualify the design intent, then issue one RFQ.

Technology qualificationNH₃, CO₂ or HFO — CAPEX, OPEX and application fit.RFQ checklistDuty, redundancy, controls and commissioning scope.Project documentation centerAssemble the technical pack before tendering.
Start structured RFQ — free How the process works

Supplier-neutral. Free for buyers and project owners. Best suited to commercial projects from USD $250,000.