IQF freezer suppliers — fluidised bed, spiral and impingement line manufacturers (2026)
IQF freezer suppliers must guarantee kg/h at your product, piece size and inlet temperature, with stated dehydration loss and specific energy consumption. ColdMatch sources fluidised-bed, spiral-IQF, impingement and plate lines from suitable manufacturers and returns comparable, line-integrated offers.
What ColdMatch delivers
- Fluidised-bed IQF: peas, berries, diced vegetables, shrimp — highest product separation
- Spiral IQF: fillets, portions and packaged product needing longer residence time
- Impingement: thin products, burgers and fillets requiring fast surface freeze
- Key comparison metrics: kg/h, dehydration loss %, kWh per tonne, CIP and washdown rating
- Line integration — infeed, dewatering, glazing, weighing and packing — belongs in the same RFQ
Next steps for this project
You submit one RFQ. Our team handles the supplier outreach.
There is no direct buyer-to-supplier connection. Your request comes to the ColdMatch team, which contacts suitable suppliers and manufacturers on your behalf. Supplier and manufacturer information on this site is for research only; it is not a contact directory and does not mean a supplier has been vetted.
- You build your project and submit an RFQ.
- The ColdMatch team validates and organizes the requirements.
- We contact suitable suppliers and manufacturers for you.
- We present their organized responses to you through ColdMatch.
Supplier and manufacturer information is provided for research only; it is not a directory for direct contact. There is no direct buyer-to-supplier connection: every RFQ comes to the ColdMatch team, which validates it, contacts suitable suppliers on the buyer's behalf and presents organized responses through ColdMatch.
Who supplies IQF freezers?
IQF lines come from specialist freezing-equipment manufacturers building fluidised-bed, spiral, impingement and plate freezers, usually with their own refrigeration package or in partnership with a plant OEM. Line integrators additionally supply infeed, dewatering, glazing, weighing and packing as a single scope.
What must an IQF supplier guarantee?
Guaranteed throughput in kg/h for your specific product and piece size, from a stated inlet temperature to a stated core temperature, plus a maximum dehydration loss percentage and a specific energy consumption in kWh per tonne. Verify all four at commissioning, with a test run at the supplier's centre before contract where possible.
How much does an IQF line cost?
Small fluidised-bed units at 500–1,000 kg/h typically run USD 180,000–400,000; high-capacity spiral or multi-belt lines with refrigeration, dewatering and glazing reach USD 600,000–2,000,000 and above. Confirm whether refrigeration plant, installation and line integration are inside or outside the quoted price.
- •500–1,000 kg/h fluidised-bed line for berries or vegetables
- •1–3 t/h spiral IQF for fillets and portioned product
- •Shrimp or peeled-seafood IQF with glazing and grading
Exact system sizing depends on required temperature, ambient climate, product load and turnover rate, door openings, insulation specification, storage duration, redundancy level and operating hours. ColdMatch does not manufacture equipment — we help industrial buyers compare suitable suppliers and technologies against project-specific technical and commercial requirements.
- •Country, project location and site status (greenfield or existing building)
- •Application and product stored or processed
- •Required temperature range and any humidity requirement
- •Storage capacity (m², m³ or pallet positions) and daily throughput
- •Ambient/design climate conditions at site
- •Available power supply and backup or redundancy requirement
- •Preferred refrigerant, if already defined by policy or regulation
- •Indicative budget range and target commissioning date
- •Product, piece size and required throughput in kg/h
- •Inlet temperature and target core temperature
- •Maximum acceptable dehydration loss (%)
- •Upstream and downstream line equipment to integrate
- •Hygiene standard, CIP requirement and export certification
Frequently asked questions
How ColdMatch Group works — independent B2B procurement and sourcing platform — ColdMatch Group is an independent B2B procurement and sourcing platform for industrial refrigeration, cold storage and cold-chain projects from USD $250K+, where the ColdMatch team reviews each buyer brief, contacts suitable third-party suppliers on the buyer's behalf and organizes their responses.
Explore every ColdMatch buying guide
RFQ checklist, cost benchmarks, and country-by-country buying guides — all in one hub.
Back to Guides HubTake this to a structured refrigeration RFQ
Refrigeration bids are only comparable when refrigerant, duty, evaporating temperature, redundancy and controls are specified. Qualify the design intent, then issue one RFQ.
Supplier-neutral. Free for buyers and project owners. Best suited to commercial projects from USD $250,000.