Country refrigeration procurement brief · Peru
Industrial refrigeration and cold storage procurement in Peru
Peru is a global leader in export produce (berries, grapes, avocados) and fisheries, with significant demand for pre-cooling, packhouses and port logistics near Lima, Callao and Trujillo.
Direct procurement answer
Peru is phasing down HFCs under the Kigali Amendment, implemented by the ozone office at MINAM. Medicine storage follows DIGEMID good distribution practice, while food establishments are regulated by SENASA (agriculture/livestock) or SANIPES (fisheries). All structures must comply with the E.030 seismic resistance norm.
For a cold storage project in Peru, define throughput, temperature zones, clear height, refrigerant constraints and utility capacity before requesting prices. Use one technical brief for every bidder, verify local compliance evidence and compare lifecycle cost rather than equipment price alone.
Country-specific planning priorities
The Peruvian cold chain market
Export-oriented agriculture and fisheries dominate capacity needs.
- Large-scale fruit packhouses with forced-air pre-cooling.
- Fishery-sector blast freezers and cold stores at major ports.
- Retail and pharma cold chain expansion in Lima.
Regulations
Sector-specific health approvals and strict building codes.
- Kigali Amendment implementation via MINAM; phasing out high-GWP HFCs.
- DIGEMID supervises pharma GDP; SENASA/SANIPES control food hygiene and export standards.
- E.030 seismic design is mandatory for building structure and high-bay racking.
Cost and timeline drivers
Geography and seismic risk add to project complexity.
- Seismic structural design significantly impacts steel and racking costs.
- Port congestion can delay imported equipment delivery.
- Proximity to key export hubs is critical for operational efficiency.
A supplier-ready procurement sequence
- 01Confirm products, daily throughput, storage duration and temperature zones.
- 02Convert demand into room layout, pallet positions, cooling duty and utility requirements.
- 03Record local permitting, refrigerant, food or pharmaceutical obligations in the same brief.
- 04Issue an identical RFQ to qualified suppliers and compare exclusions, controls, commissioning and service coverage.
- 05Complete engineering and local compliance review before contract award.
Official sources for these rules
Rules on this page are summarised from the regulators and legal texts below. Always read the current version before design or tender.
- Ozone Technical Office — HFC phase-down schedule (Kigali) — MINAM
- Good Storage and Distribution Practices (BPA/BPD) for medicines — DIGEMID
- Agricultural and Fisheries health and safety regulations — SENASA / SANIPES
- Norma Técnica E.030 Diseño Sismorresistente — El Peruano
Links checked: 2026-09-26
Preliminary project estimate
Model the layout, insulated envelope, cooling capacity and indicative budget for Peru. The result transfers into a supplier-ready RFQ.
Preliminary cold store estimate
Enter floor area, clear height, temperature and panel material. The estimate combines layout, materials, a project brief and budget in one result.
1. Layout
2. Building materials
3. Budget
| Insulated panels | PEN 105,056 |
| Floor insulation / heating | PEN 21,000 |
| Refrigeration equipment | PEN 302,400 |
| Insulated doors | PEN 23,625 |
| Pallet racking | PEN 186,165 |
| Installation labour | PEN 101,864 |
| Electrical & controls | PEN 51,730 |
| Contingency (10%) | PEN 79,184 |
| Indicative total | PEN 871,024 |
4. Project brief (copy for suppliers)
Peru — Cold store, Chilled 0…+4 °C, 400 m² × 8 m clear height, PIR 100 mm panels, approx. 788 pallet positions, approx. 128 kW refrigeration. Indicative budget PEN 871,024. Please quote on these assumptions.
Rough planning estimate using general assumptions (40/60 W per m³, 1.9 m² per pallet position, typical panel prices). Excludes land, building shell, permits, taxes and freight. Not a quotation.
PEN · ×0.7 local cost level · INEI: Índice de precios de materiales de construcción
Get this reviewed — start an RFQQuestions buyers ask before tender
Which refrigerants are preferred in Peru?
Natural refrigerants (ammonia and CO₂) are standard for large industrial sites, avoiding future phase-down costs under the Kigali Amendment.
Who approves a cold store for exports?
Facilities for produce or meat need SENASA approval; fisheries require SANIPES certification.
How strict is the seismic code?
The E.030 seismic norm is strictly enforced for industrial buildings and high-bay warehouse racking.
Can ColdMatch help with a Peruvian project?
Yes. ColdMatch reviews the brief, prepares a comparable RFQ and introduces independent suppliers. It does not build, sell or finance facilities.
How does ColdMatch select suppliers for this country?
ColdMatch first reviews project scope, location, scale and technical requirements. The team then contacts suitable suppliers on the buyer's behalf and presents organized responses; suppliers cannot buy a ranking or automatic shortlist position.
ColdMatch reviews the project brief, contacts suitable independent suppliers on the buyer's behalf and presents organized responses. It does not manufacture, install, guarantee, lend, provide financial advice or sell paid rankings.
Two procurement paths
Competitive quotations or one accountable EPC partner
For commercial and industrial projects from USD 250K+. ColdMatch reviews the project, contacts suitable independent manufacturers, integrators or EPC contractors on the buyer's behalf, and presents organized responses for comparison. Final execution responsibility remains with the selected contractor or supplier.
A. Multi-supplier procurement
One structured RFQ, comparable quotations from several technically relevant suppliers. Best when you manage the design or want to benchmark equipment packages.
Start a multi-supplier RFQB. Turnkey EPC matching
One accountable manufacturer, integrator or EPC contractor for the complete scope: thermal design, refrigeration plant, panels, racking, automation, controls, backup, shipping, installation, commissioning, training, warranty and maintenance — delivered by the contractor, not by ColdMatch.
Start a turnkey EPC briefTurnkey, EPC and supply: direct answers
- What is a turnkey cold storage project?
- A project where one accountable manufacturer, integrator or EPC contractor delivers the complete facility — design, refrigeration plant, insulated envelope, installation and commissioning — under a single contract with single-point responsibility.
- What does a refrigeration EPC contractor provide?
- Engineering (thermal load and plant design), procurement of equipment and materials, and construction: installation, commissioning, training and handover, usually with warranty and optional maintenance.
- What information is required before quoting a cold store?
- Product stored, temperature zones, storage volume or pallet positions, daily throughput and entry temperature, site and ambient design temperature, power supply and backup, redundancy level, scope of supply, budget and project stage.
- Can one contractor deliver the complete cold-chain project?
- Yes, for many projects a single EPC contractor or integrator can take full responsibility. Very large or multi-site programmes sometimes split civil works, refrigeration and automation between specialists.
- What does commissioning include?
- Pressure and leak testing, refrigerant charging, start-up, pull-down to design temperature, controls and alarm verification, performance testing against the specification, operator training and handover documentation.
- Does ColdMatch install refrigeration systems?
- No. ColdMatch does not engineer, install, commission or operate anything. Its team reviews the project, contacts suitable independent manufacturers, integrators or EPC contractors on the buyer's behalf and presents organized responses; execution responsibility stays with the selected contractor.
- Does ColdMatch provide financing?
- No. ColdMatch is not a lender or bank. It may introduce qualified projects to independent third-party financing providers for evaluation; approval and terms are decided solely by those providers.
- How are refrigeration suppliers selected?
- Each request is reviewed manually. Suppliers or EPC contractors are shortlisted against the stated scope, technology, country, project scale and comparable references, and the buyer makes the final choice.
- What is the difference between equipment supply and full EPC delivery?
- Equipment supply covers delivered hardware only; the buyer manages design, installation and interfaces. Full EPC delivery puts engineering, supply, installation and commissioning under one contractor with single-point responsibility.