Country refrigeration procurement brief · Israel
Industrial refrigeration and cold storage procurement in Israel
Israel combines export horticulture (citrus, avocados, peppers, dates), a large dairy and poultry sector, a strong pharma and life-science base, and port logistics through Haifa, Ashdod and Eilat. Hot summers and limited land push projects towards compact, high-bay and energy-efficient designs.
Direct procurement answer
Israel regulates ozone-depleting and HFC refrigerants through the Ministry of Environmental Protection under its Montreal Protocol and Kigali commitments. Medicine storage and distribution follow Ministry of Health good distribution practice, food businesses need a business licence with Ministry of Health and veterinary approvals, and structures must meet Israeli Standard SI 413 for seismic design.
For a cold storage project in Israel, define throughput, temperature zones, clear height, refrigerant constraints and utility capacity before requesting prices. Use one technical brief for every bidder, verify local compliance evidence and compare lifecycle cost rather than equipment price alone.
Country-specific planning priorities
The Israeli cold chain market
Export produce, dairy, poultry and pharma drive demand.
- Packhouses with forced-air pre-cooling and controlled-atmosphere stores for citrus, avocados and dates.
- Frozen and chilled distribution centres serving retail around Tel Aviv and the central region.
- Port cold stores at Haifa and Ashdod for export fruit and imported meat and fish.
Regulations
National environmental, health and building rules apply.
- The Ministry of Environmental Protection implements Montreal Protocol and Kigali Amendment controls on refrigerants.
- The Ministry of Health supervises pharmaceutical storage and distribution (GDP) and food establishment hygiene.
- Veterinary Services approve facilities handling meat, poultry, fish and dairy; SI 413 seismic design applies to structures and racking.
Temperature classes and cost drivers
The temperature class is the first decision: it fixes panel thickness, refrigeration load and budget. Estimator figures come from ColdMatch's central cost baseline.
- Chilled +0/+4 °C for produce and dairy; frozen −18/−25 °C for meat, fish and ready meals; +2/+8 °C for pharma with GDP mapping and monitoring.
- High summer ambient temperatures raise condensing loads — specify efficient condensers and consider solar PV to offset electricity costs.
- Land cost and permitting time often matter more than equipment price; high-bay layouts reduce footprint.
How a project works with ColdMatch
Human review comes first.
- You send a short project brief; ColdMatch reviews scope, temperatures and budget.
- ColdMatch prepares a comparable RFQ and only then introduces suitable independent suppliers.
- Typical projects start around USD 250,000. ColdMatch does not build, sell or finance facilities.
A supplier-ready procurement sequence
- 01Confirm products, daily throughput, storage duration and temperature zones.
- 02Convert demand into room layout, pallet positions, cooling duty and utility requirements.
- 03Record local permitting, refrigerant, food or pharmaceutical obligations in the same brief.
- 04Issue an identical RFQ to qualified suppliers and compare exclusions, controls, commissioning and service coverage.
- 05Complete engineering and local compliance review before contract award.
Official sources for these rules
Rules on this page are summarised from the regulators and legal texts below. Always read the current version before design or tender.
- Ozone layer protection and HFC controls (Montreal Protocol / Kigali) — Ministry of Environmental Protection
- Pharmaceutical division — good distribution practice — Ministry of Health
- Ministry of Agriculture — veterinary services and food of animal origin — Veterinary Services
- SI 413 — Design provisions for earthquake resistance of structures — Standards Institution of Israel
Links checked: 2026-09-26
Preliminary project estimate
Model the layout, insulated envelope, cooling capacity and indicative budget for Israel. The result transfers into a supplier-ready RFQ.
Preliminary cold store estimate
Enter floor area, clear height, temperature and panel material. The estimate combines layout, materials, a project brief and budget in one result.
1. Layout
2. Building materials
3. Budget
| Insulated panels | ILS 162,887 |
| Floor insulation / heating | ILS 32,560 |
| Refrigeration equipment | ILS 468,864 |
| Insulated doors | ILS 36,630 |
| Pallet racking | ILS 288,644 |
| Installation labour | ILS 157,938 |
| Electrical & controls | ILS 80,206 |
| Contingency (10%) | ILS 122,773 |
| Indicative total | ILS 1,350,502 |
4. Project brief (copy for suppliers)
Israel — Cold store, Chilled 0…+4 °C, 400 m² × 8 m clear height, PIR 100 mm panels, approx. 788 pallet positions, approx. 128 kW refrigeration. Indicative budget ILS 1,350,502. Please quote on these assumptions.
Rough planning estimate using general assumptions (40/60 W per m³, 1.9 m² per pallet position, typical panel prices). Excludes land, building shell, permits, taxes and freight. Not a quotation.
ILS · ×1.1 local cost level · CBS Israel: Input price index for residential building and construction
Get this reviewed — start an RFQQuestions buyers ask before tender
How much does a cold store in Israel cost?
Use the estimator on this page for a first envelope + refrigeration figure from ColdMatch's central baseline. Land, building shell, permits and connection costs are separate and often significant in Israel.
Which refrigerants are used in Israeli cold stores?
Ammonia and CO₂ systems are common for large sites; HFC systems face tightening controls under Israel's Kigali commitments, so check current Ministry of Environmental Protection rules before design.
Who approves a food or pharma cold store?
Food establishments need a business licence plus Ministry of Health or Veterinary Services approval depending on product; pharma storage follows Ministry of Health GDP requirements.
Does seismic design affect a cold store in Israel?
Yes. SI 413 applies to the building structure and must be considered for high-bay racking and roof-mounted equipment.
Can ColdMatch help with an Israeli project?
Yes. ColdMatch reviews the brief, prepares a comparable RFQ and introduces independent suppliers. It does not build, sell or finance facilities.
How does ColdMatch select suppliers for this country?
ColdMatch first reviews project scope, location, scale and technical requirements. The team then contacts suitable suppliers on the buyer's behalf and presents organized responses; suppliers cannot buy a ranking or automatic shortlist position.
ColdMatch reviews the project brief, contacts suitable independent suppliers on the buyer's behalf and presents organized responses. It does not manufacture, install, guarantee, lend, provide financial advice or sell paid rankings.
Two procurement paths
Competitive quotations or one accountable EPC partner
For commercial and industrial projects from USD 250K+. ColdMatch reviews the project, contacts suitable independent manufacturers, integrators or EPC contractors on the buyer's behalf, and presents organized responses for comparison. Final execution responsibility remains with the selected contractor or supplier.
A. Multi-supplier procurement
One structured RFQ, comparable quotations from several technically relevant suppliers. Best when you manage the design or want to benchmark equipment packages.
Start a multi-supplier RFQB. Turnkey EPC matching
One accountable manufacturer, integrator or EPC contractor for the complete scope: thermal design, refrigeration plant, panels, racking, automation, controls, backup, shipping, installation, commissioning, training, warranty and maintenance — delivered by the contractor, not by ColdMatch.
Start a turnkey EPC briefTurnkey, EPC and supply: direct answers
- What is a turnkey cold storage project?
- A project where one accountable manufacturer, integrator or EPC contractor delivers the complete facility — design, refrigeration plant, insulated envelope, installation and commissioning — under a single contract with single-point responsibility.
- What does a refrigeration EPC contractor provide?
- Engineering (thermal load and plant design), procurement of equipment and materials, and construction: installation, commissioning, training and handover, usually with warranty and optional maintenance.
- What information is required before quoting a cold store?
- Product stored, temperature zones, storage volume or pallet positions, daily throughput and entry temperature, site and ambient design temperature, power supply and backup, redundancy level, scope of supply, budget and project stage.
- Can one contractor deliver the complete cold-chain project?
- Yes, for many projects a single EPC contractor or integrator can take full responsibility. Very large or multi-site programmes sometimes split civil works, refrigeration and automation between specialists.
- What does commissioning include?
- Pressure and leak testing, refrigerant charging, start-up, pull-down to design temperature, controls and alarm verification, performance testing against the specification, operator training and handover documentation.
- Does ColdMatch install refrigeration systems?
- No. ColdMatch does not engineer, install, commission or operate anything. Its team reviews the project, contacts suitable independent manufacturers, integrators or EPC contractors on the buyer's behalf and presents organized responses; execution responsibility stays with the selected contractor.
- Does ColdMatch provide financing?
- No. ColdMatch is not a lender or bank. It may introduce qualified projects to independent third-party financing providers for evaluation; approval and terms are decided solely by those providers.
- How are refrigeration suppliers selected?
- Each request is reviewed manually. Suppliers or EPC contractors are shortlisted against the stated scope, technology, country, project scale and comparable references, and the buyer makes the final choice.
- What is the difference between equipment supply and full EPC delivery?
- Equipment supply covers delivered hardware only; the buyer manages design, installation and interfaces. Full EPC delivery puts engineering, supply, installation and commissioning under one contractor with single-point responsibility.