Country refrigeration procurement brief · Brazil
Industrial refrigeration and cold storage procurement in Brazil
Brazil is one of the world's largest exporters of chicken, beef, pork and fruit, and has a fast-growing pharmaceutical market. That creates steady demand for freezing tunnels, export cold stores and distribution warehouses.
Direct procurement answer
A cold storage project in Brazil must follow MAPA inspection rules (SIF) for meat and animal products, ANVISA RDC 430/2020 for medicine storage and distribution, and NR-36 worker-protection rules in meat plants. The hot, humid climate raises refrigeration load, so specify thicker insulation, good vapour barriers and efficient condensing.
For a cold storage project in Brazil, define throughput, temperature zones, clear height, refrigerant constraints and utility capacity before requesting prices. Use one technical brief for every bidder, verify local compliance evidence and compare lifecycle cost rather than equipment price alone.
Compare a complete project quote, not just equipment prices
For industrial projects from USD 250,000, ask every bidder to return the same scope schedule. A manufacturer, component supplier and design/build contractor may offer different boundaries: an advertised product range does not prove complete EPC capability or local service coverage.
Cold storage cost by tonnes and temperature: what belongs in the quotation?
A turnkey cold-store quotation needs more than stored tonnes and a room setpoint. Specify product, peak inventory, daily receipts, entry and target core temperatures, usable space and site conditions. Separate storage from blast-freezing throughput, then define new-build, expansion or retrofit scope. Request comparable exclusions and acceptance criteria; capacity alone cannot establish an installed price.
| Project | Capacity and temperature inputs | Quote boundary |
|---|---|---|
| New food cold store | Product; peak stored tonnes; pallets and density; tonnes/day received; arrival temperature; room and product-core targets. | Usable volume, envelope, civil works, refrigeration, utilities, installation, commissioning and exclusions. |
| Blast-freezer installation | Product and packaging; tonnes/batch or tonnes/hour; entry and final core temperatures; cycle time, loading and defrost windows. | Guaranteed product-core duty under agreed test conditions; distinguish batch throughput from continuous line throughput. |
| Warehouse expansion | Existing and additional inventory; peak simultaneous receipts; temperature zones; survey of plant, power and structural capacity. | Live-site interfaces, isolation, temporary cooling, downtime, controls integration and staged commissioning. |
| Refrigeration retrofit or replacement | Existing equipment and refrigerant; condition survey; measured loads and energy boundary; proposed duty and outage window. | Reuse versus replacement, safety review, refrigerant recovery, demolition, controls, local approvals and performance acceptance. |
Product temperature examples are not universal food-safety specifications. Have the responsible food-safety and refrigeration specialists approve product targets and design conditions. State currency, taxes, freight, tariff date and exclusions in each offer; do not infer USD/tonne from an equipment-only price.
Buying a refrigeration plant for a project abroad
Keep the buyer's country, equipment origin and project destination separate. A cross-border turnkey quotation should name the installation site, shipment term and named place, importer, local installation team, approval responsibilities and acceptance tests. Compare landed and commissioned scope—not an export equipment price alone. In the project RFQ, use the installation country; record the buyer and supplier-origin preferences in the brief.
- Define the destination site: city, capacity, product temperatures, utility survey and operating conditions; list the buyer's legal entity separately.
- Ask for the Incoterms® rule, edition and named place; allocate freight, insurance, customs clearance, duties and taxes explicitly. Ask a qualified customs adviser to confirm classification and applicable charges.
- Name who checks destination building, electrical, pressure-system, refrigerant and food-sector requirements. Request the local installation and service plan; an overseas office alone is not proof of this scope.
- Align currency, quotation validity, payment milestones, exchange-rate assumptions, warranty territory, spares, training and loaded-site acceptance. Identify excluded civil works, power upgrades and temporary cooling.
Incoterms® allocation is not a complete turnkey contract: agree design, commissioning, guarantees and dispute terms separately. ColdMatch reviews the project and organizes supplier responses; it does not provide customs, legal or engineering approval. External financing is optional and requires separate consent.
ICC: Incoterms® rules and their scope| Decision | Evidence to request | What can make offers incomparable |
|---|---|---|
| Warehouse holding or blast freezing? | Stored pallets and turnover; product mass per batch, entry/core temperatures and required cycle time for freezing. | Holding-room volume used as a substitute for process pull-down duty. |
| Equipment package or turnkey design/build? | Named responsibility for civil works, envelope, floor frost protection, refrigeration, power, controls and commissioning. | Unpriced interfaces, freight, duties, permits, installation or utility upgrades. |
| Expansion or new facility? | Site survey, existing plant condition, available power, outage windows and temporary storage plan. | Lost production and temporary cooling omitted from the programme. |
| Lifecycle cost and performance | Annual kWh assumptions, tariff, operating hours, load profile, water, maintenance and replacements; kWh/kg with a defined boundary and throughput. | Different ambient conditions or occupancies; energy per stored kg compared with energy per frozen kg. |
| Acceptance and local support | Agreed temperature-mapping conditions, measured product-core performance where relevant, alarms, training, documentation and service exclusions. | A room-air setpoint presented as proof that product freezing or loaded-room performance is achieved. |
Worked scope example — assumptions, not an engineering design
Suppose a buyer plans 1,000 pallet positions and receives 20 tonnes of food per day. Pallet positions describe holding capacity, not blast-freezer throughput. Before a quotation, record which products arrive already frozen, which need cooling or freezing, their entry and target core temperatures, batch size and permitted cycle time. The engineer then calculates separate holding, pull-down, door and process loads; no equipment capacity or price follows from these two inputs alone.
Choose the next decision before asking for a price
- 1.Scope incomplete: define throughput, temperatures, site constraints and exclusions before seeking comparable prices.
- 2.Own design team: compare equipment packages with explicit interface responsibilities.
- 3.Need one accountable contractor: request a turnkey scope and verify the contractor's actual design, installation and local-service responsibilities.
Editorial review: · ColdMatch Group
Country-specific planning priorities
Regulations
Rules depend on product type and export destination.
- MAPA and the SIF federal inspection service govern slaughterhouses and animal-product cold stores, especially for export.
- ANVISA RDC 430/2020 sets good distribution and storage practices for medicines.
- NR-36 covers worker safety in meat and poultry plants, including cold work environments.
Hot-climate design
High ambient temperature and humidity drive the design.
- Higher condensing temperatures increase compressor power — consider evaporative condensers or CO₂/ammonia systems.
- Vapour barriers and door management prevent ice on evaporators and panels.
- Backup power matters where grid reliability varies.
Typical projects
Export protein and fruit dominate large projects.
- Freezing tunnels and frozen stores at poultry and pork plants in the South.
- Port-side export cold stores for meat and fruit.
- Pharma and food distribution centres around São Paulo.
A supplier-ready procurement sequence
- 01Confirm products, daily throughput, storage duration and temperature zones.
- 02Convert demand into room layout, pallet positions, cooling duty and utility requirements.
- 03Record local permitting, refrigerant, food or pharmaceutical obligations in the same brief.
- 04Issue an identical RFQ to qualified suppliers and compare exclusions, controls, commissioning and service coverage.
- 05Complete engineering and local compliance review before contract award.
Official sources for these rules
Rules on this page are summarised from the regulators and legal texts below. Always read the current version before design or tender.
- RDC 430/2020 — good distribution and storage practices for medicines — ANVISA
- Federal Inspection Service (SIF) for animal products — MAPA
- NR-36 — safety in meat and poultry processing — Ministério do Trabalho e Emprego
Links checked: 2026-09-26
Preliminary project estimate
Model the layout, insulated envelope, cooling capacity and indicative budget for Brazil. The result transfers into a supplier-ready RFQ.
Preliminary cold store estimate
Enter floor area, clear height, temperature and panel material. The estimate combines layout, materials, a project brief and budget in one result.
1. Layout
2. Building materials
3. Budget
| Insulated panels | BRL 172,893 |
| Floor insulation / heating | BRL 34,560 |
| Refrigeration equipment | BRL 497,664 |
| Insulated doors | BRL 38,880 |
| Pallet racking | BRL 306,374 |
| Installation labour | BRL 167,639 |
| Electrical & controls | BRL 85,132 |
| Contingency (10%) | BRL 130,314 |
| Indicative total | BRL 1,433,457 |
4. Project brief (copy for suppliers)
Brazil — Cold store, Chilled 0…+4 °C, 400 m² × 8 m clear height, PIR 100 mm panels, approx. 788 pallet positions, approx. 128 kW refrigeration. Indicative budget BRL 1,433,457. Please quote on these assumptions.
Rough planning estimate using general assumptions (40/60 W per m³, 1.9 m² per pallet position, typical panel prices). Excludes land, building shell, permits, taxes and freight. Not a quotation.
BRL · ×0.8 local cost level · IBGE: SINAPI — construction costs and indices
Get this reviewed — start an RFQQuestions buyers ask before tender
What rules apply to a meat cold store in Brazil?
Meat and animal-product facilities fall under MAPA; export plants need SIF federal inspection and must meet the destination country's requirements.
Which regulation covers pharmaceutical storage in Brazil?
ANVISA RDC 430/2020 sets good practices for distribution, storage and transport of medicines, including temperature control and qualification.
Why does refrigeration cost more in hot climates?
Higher outside temperatures raise heat gain through walls and the condensing temperature, so compressors work harder. Thicker panels and efficient systems reduce this.
Can ColdMatch introduce suppliers for a project in Brazil?
Yes. ColdMatch reviews your brief and introduces independent suppliers; it does not manufacture, install or finance equipment.
How does ColdMatch select suppliers for this country?
ColdMatch first reviews project scope, location, scale and technical requirements. The team then contacts suitable suppliers on the buyer's behalf and presents organized responses; suppliers cannot buy a ranking or automatic shortlist position.
ColdMatch reviews the project brief, contacts suitable independent suppliers on the buyer's behalf and presents organized responses. It does not manufacture, install, guarantee, lend, provide financial advice or sell paid rankings.
Two procurement paths
Competitive quotations or one accountable EPC partner
For commercial and industrial projects from USD 250K+. ColdMatch reviews the project, contacts suitable independent manufacturers, integrators or EPC contractors on the buyer's behalf, and presents organized responses for comparison. Final execution responsibility remains with the selected contractor or supplier.
A. Multi-supplier procurement
One structured RFQ, comparable quotations from several technically relevant suppliers. Best when you manage the design or want to benchmark equipment packages.
Start a multi-supplier RFQB. Turnkey EPC matching
One accountable manufacturer, integrator or EPC contractor for the complete scope: thermal design, refrigeration plant, panels, racking, automation, controls, backup, shipping, installation, commissioning, training, warranty and maintenance — delivered by the contractor, not by ColdMatch.
Start a turnkey EPC briefTurnkey, EPC and supply: direct answers
- What is a turnkey cold storage project?
- A project where one accountable manufacturer, integrator or EPC contractor delivers the complete facility — design, refrigeration plant, insulated envelope, installation and commissioning — under a single contract with single-point responsibility.
- What does a refrigeration EPC contractor provide?
- Engineering (thermal load and plant design), procurement of equipment and materials, and construction: installation, commissioning, training and handover, usually with warranty and optional maintenance.
- What information is required before quoting a cold store?
- Product stored, temperature zones, storage volume or pallet positions, daily throughput and entry temperature, site and ambient design temperature, power supply and backup, redundancy level, scope of supply, budget and project stage.
- Can one contractor deliver the complete cold-chain project?
- Yes, for many projects a single EPC contractor or integrator can take full responsibility. Very large or multi-site programmes sometimes split civil works, refrigeration and automation between specialists.
- What does commissioning include?
- Pressure and leak testing, refrigerant charging, start-up, pull-down to design temperature, controls and alarm verification, performance testing against the specification, operator training and handover documentation.
- Does ColdMatch install refrigeration systems?
- No. ColdMatch does not engineer, install, commission or operate anything. Its team reviews the project, contacts suitable independent manufacturers, integrators or EPC contractors on the buyer's behalf and presents organized responses; execution responsibility stays with the selected contractor.
- Does ColdMatch provide financing?
- No. ColdMatch is not a lender or bank. It may introduce qualified projects to independent third-party financing providers for evaluation; approval and terms are decided solely by those providers.
- How are refrigeration suppliers selected?
- Each request is reviewed manually. Suppliers or EPC contractors are shortlisted against the stated scope, technology, country, project scale and comparable references, and the buyer makes the final choice.
- What is the difference between equipment supply and full EPC delivery?
- Equipment supply covers delivered hardware only; the buyer manages design, installation and interfaces. Full EPC delivery puts engineering, supply, installation and commissioning under one contractor with single-point responsibility.