Country refrigeration procurement brief · Austria
Industrial refrigeration and cold storage procurement in Austria
Austria's cold chain supports agriculture, food retail, and a vital pharmaceutical hub, often integrating high-efficiency natural refrigerants to meet strict environmental standards.
Direct procurement answer
Cold stores follow EU F-gas Regulation 2024/573, with national supervision by the BMK and regional trade authorities (Gewerbeordnung). Medicine storage follows BASG GDP, food control is handled by AGES, and safety for refrigeration plant design must align with ÖNORM EN 378.
For a cold storage project in Austria, define throughput, temperature zones, clear height, refrigerant constraints and utility capacity before requesting prices. Use one technical brief for every bidder, verify local compliance evidence and compare lifecycle cost rather than equipment price alone.
European cold-store procurement: equipment package or turnkey project?
For an industrial cold store, expansion or refrigeration replacement, first define who designs and installs the complete system. A compressor OEM is not automatically a cold-warehouse builder. Compare equipment-only and turnkey offers using the same temperatures, throughput, site conditions and acceptance criteria; ColdMatch reviews the buyer's brief and obtains organized supplier responses, not an engineering approval or a guaranteed price.
Prepare a project request in three steps
- 01Describe the product, capacity and installation country.
- 02Record temperatures, new-build or retrofit scope, budget and timing.
- 03Submit contact details and consent for ColdMatch team review.
Managed supplier-neutral procurement for industrial projects from USD 250,000. ColdMatch is not a manufacturer or EPC contractor; our team contacts suppliers on your behalf and presents responses. Existing free planning tools remain available.
| Purchase decision | Comparable quotation basis | Limits to confirm |
|---|---|---|
| Warehouse construction / EPC | Civil works, insulated envelope, floor frost protection, racking, refrigeration, power, controls, commissioning and named interface owners. | EPC describes a contractual scope, not proof of local permitting, installation or service capability. |
| Cost per pallet position | Separate total installed project cost per designed pallet position from a storage-service charge per pallet/day; state occupancy, usable positions, currency, VAT and exclusions. | No verified German installed price is supplied here. Pallet count alone cannot determine project cost. |
| Ammonia or CO₂ plant | Same design duty and ambient, refrigerant charge, architecture, redundancy, annual energy assumptions and competent local support. | Neither refrigerant is universally preferable; safety and efficiency require project-specific engineering. |
| Turnkey blast-freezer quotation | Product, kg/batch or kg/hour, entry and final core temperatures, freezing time, packaging, loading pattern and defrost schedule. | Room-air temperature and stored tonnes do not establish product freezing capacity. |
| Retrofit / food-plant tender / ROI | Survey existing assets, outage and temporary-cooling plan; compare energy, maintenance, production loss and replacement assumptions on one boundary. | A scenario calculator is not a supplier guarantee, financial advice or proof of payback. |
EU projects: ask the appointed engineer to identify the applicable equipment category and dates under Regulation (EU) 2024/573, and document refrigerant, safety, pressure-equipment and local permitting requirements. NH₃ or CO₂ does not make the entire installation automatically compliant. For the UK and Norway, verify the applicable national framework separately; EU dates are not assumed to apply unchanged.
Country-specific planning priorities
The Austrian cold chain market
Quality-focused, energy-efficient and highly regulated.
- Specialised pharmaceutical distribution facilities.
- Regional food retail warehouses and dairy cold stores.
- High-standard, energy-optimized cold logistics centers.
Regulations
EU directives with stringent national plant-permit requirements.
- EU F-gas Regulation 2024/573; systems must meet strict leak and reporting rules.
- Gewerbeordnung (Trade Law) for industrial plant permits.
- BASG (GDP) for medicines; AGES (hygiene/veterinary) for food establishments.
Cost and timeline drivers
Energy efficiency and plant permitting are central to planning.
- Industrial plant permitting (Betriebsanlagengenehmigung) can be extensive.
- Focus on high-efficiency, low-GWP systems to reduce energy/tax costs.
- Strict land-use planning (Raumordnung) near urban centers.
A supplier-ready procurement sequence
- 01Confirm products, daily throughput, storage duration and temperature zones.
- 02Convert demand into room layout, pallet positions, cooling duty and utility requirements.
- 03Record local permitting, refrigerant, food or pharmaceutical obligations in the same brief.
- 04Issue an identical RFQ to qualified suppliers and compare exclusions, controls, commissioning and service coverage.
- 05Complete engineering and local compliance review before contract award.
Official sources for these rules
Rules on this page are summarised from the regulators and legal texts below. Always read the current version before design or tender.
- Regulation (EU) 2024/573 on fluorinated greenhouse gases — EUR-Lex
- National F-gas legislation and ozone protection — BMK
- Good Distribution Practice (GDP) for pharmaceuticals — BASG
- Austrian Agency for Health and Food Safety — AGES
Links checked: 2026-09-26
Preliminary project estimate
Model the layout, insulated envelope, cooling capacity and indicative budget for Austria. The result transfers into a supplier-ready RFQ.
Preliminary cold store estimate
Enter floor area, clear height, temperature and panel material. The estimate combines layout, materials, a project brief and budget in one result.
1. Layout
2. Building materials
3. Budget
| Insulated panels | EUR 40,502 |
| Floor insulation / heating | EUR 8,096 |
| Refrigeration equipment | EUR 116,582 |
| Insulated doors | EUR 9,108 |
| Pallet racking | EUR 71,771 |
| Installation labour | EUR 39,271 |
| Electrical & controls | EUR 19,943 |
| Contingency (10%) | EUR 30,527 |
| Indicative total | EUR 335,801 |
4. Project brief (copy for suppliers)
Austria — Cold store, Chilled 0…+4 °C, 400 m² × 8 m clear height, PIR 100 mm panels, approx. 788 pallet positions, approx. 128 kW refrigeration. Indicative budget EUR 335,801. Please quote on these assumptions.
Rough planning estimate using general assumptions (40/60 W per m³, 1.9 m² per pallet position, typical panel prices). Excludes land, building shell, permits, taxes and freight. Not a quotation.
EUR · ×1.1 local cost level · Eurostat: Construction cost and producer price indices (EU)
Get this reviewed — start an RFQQuestions buyers ask before tender
What is ÖNORM EN 378?
It is the standard for refrigeration safety and environmental requirements in Austria, which must be followed in design.
Who approves pharma storage?
The BASG (Austrian Federal Office for Safety in Health Care) grants GDP wholesale licenses.
Is ammonia common in Austria?
Yes, in industrial plants, though it requires specific safety permitting under Trade Law.
Can ColdMatch help with an Austrian project?
Yes. ColdMatch reviews the brief, prepares a comparable RFQ and introduces independent suppliers. It does not build, sell or finance facilities.
How does ColdMatch select suppliers for this country?
ColdMatch first reviews project scope, location, scale and technical requirements. The team then contacts suitable suppliers on the buyer's behalf and presents organized responses; suppliers cannot buy a ranking or automatic shortlist position.
ColdMatch reviews the project brief, contacts suitable independent suppliers on the buyer's behalf and presents organized responses. It does not manufacture, install, guarantee, lend, provide financial advice or sell paid rankings.
Two procurement paths
Competitive quotations or one accountable EPC partner
For commercial and industrial projects from USD 250K+. ColdMatch reviews the project, contacts suitable independent manufacturers, integrators or EPC contractors on the buyer's behalf, and presents organized responses for comparison. Final execution responsibility remains with the selected contractor or supplier.
A. Multi-supplier procurement
One structured RFQ, comparable quotations from several technically relevant suppliers. Best when you manage the design or want to benchmark equipment packages.
Start a multi-supplier RFQB. Turnkey EPC matching
One accountable manufacturer, integrator or EPC contractor for the complete scope: thermal design, refrigeration plant, panels, racking, automation, controls, backup, shipping, installation, commissioning, training, warranty and maintenance — delivered by the contractor, not by ColdMatch.
Start a turnkey EPC briefTurnkey, EPC and supply: direct answers
- What is a turnkey cold storage project?
- A project where one accountable manufacturer, integrator or EPC contractor delivers the complete facility — design, refrigeration plant, insulated envelope, installation and commissioning — under a single contract with single-point responsibility.
- What does a refrigeration EPC contractor provide?
- Engineering (thermal load and plant design), procurement of equipment and materials, and construction: installation, commissioning, training and handover, usually with warranty and optional maintenance.
- What information is required before quoting a cold store?
- Product stored, temperature zones, storage volume or pallet positions, daily throughput and entry temperature, site and ambient design temperature, power supply and backup, redundancy level, scope of supply, budget and project stage.
- Can one contractor deliver the complete cold-chain project?
- Yes, for many projects a single EPC contractor or integrator can take full responsibility. Very large or multi-site programmes sometimes split civil works, refrigeration and automation between specialists.
- What does commissioning include?
- Pressure and leak testing, refrigerant charging, start-up, pull-down to design temperature, controls and alarm verification, performance testing against the specification, operator training and handover documentation.
- Does ColdMatch install refrigeration systems?
- No. ColdMatch does not engineer, install, commission or operate anything. Its team reviews the project, contacts suitable independent manufacturers, integrators or EPC contractors on the buyer's behalf and presents organized responses; execution responsibility stays with the selected contractor.
- Does ColdMatch provide financing?
- No. ColdMatch is not a lender or bank. It may introduce qualified projects to independent third-party financing providers for evaluation; approval and terms are decided solely by those providers.
- How are refrigeration suppliers selected?
- Each request is reviewed manually. Suppliers or EPC contractors are shortlisted against the stated scope, technology, country, project scale and comparable references, and the buyer makes the final choice.
- What is the difference between equipment supply and full EPC delivery?
- Equipment supply covers delivered hardware only; the buyer manages design, installation and interfaces. Full EPC delivery puts engineering, supply, installation and commissioning under one contractor with single-point responsibility.