Buyer profile · Consultants & project advisors
Supplier Sourcing & Cost Benchmarking for Cold Chain Consultants
We do not replace the consultant. We support consultants behind the scenes with qualified suppliers, normalised quotes and cost benchmarks, so your recommendation to the client is backed by market evidence rather than one vendor's brochure.
A senior cold-chain specialist stays with your project from first brief to commissioning.
How do consultants use ColdMatch on client projects?
They define the technical scope, we route it to qualified suppliers, and offers come back in one comparison format. The consultant keeps the client relationship and the recommendation; ColdMatch supplies market access, benchmarks and comparable quotes behind the scenes.
Key figures at a glance
- •The consultant keeps the client relationship — always
- •Qualified suppliers matched to the defined scope
- •Offers normalised into one comparison sheet
- •Cost benchmarks by country, temperature class and volume
- •Calculators available for feasibility and pre-design work
- •Indicative figures only — confirm through supplier quotes
Will ColdMatch contact my client directly?
Not unless you ask us to. The default is that we work through you: suppliers and comparison output come back to the consultant, and client contact stays under your control.
What benchmarks are available for feasibility studies?
Cost per m³ and per pallet position by country and temperature class, energy modelling inputs, indicative lead times and typical redundancy scopes — enough to build a credible feasibility case before detailed design.
Can consultants use the calculators for client work?
Yes. The cold room cost, refrigeration capacity, energy savings, backup power ROI and RFQ budget calculators are free and are commonly used in pre-design and options studies.
Consultant pain points
What slows advisory work down.
- Limited access to qualified suppliers in unfamiliar markets
- Vendor quotes that cannot be compared line by line
- No reliable cost benchmarks for feasibility studies
- Clients pushed toward one vendor's standard solution
- Time lost chasing suppliers for missing scope
Project types
Where consultants use us most.
- Feasibility and options studies
- Technical specification and RFQ preparation
- Supplier shortlisting and qualification
- Tender evaluation and clarification support
- Retrofit, efficiency and refrigerant conversion studies
What we provide
Support that stays behind the consultant.
- Qualified supplier access across markets
- Normalised quote comparison sheets
- Country cost benchmarks and lead-time data
- Free calculators for pre-design and feasibility
- Documentation support for lender or board approval
How procurement works with ColdMatch
One structured scope goes to qualified suppliers, and every offer comes back in the same comparison format so price differences reflect real scope differences.
- Define scope: temperature regime, volume, throughput, site constraints
- We match qualified suppliers, contractors and EPCs — no open bid spam
- Quotes normalised: equipment, installation, commissioning, spares, warranty
- Comparison sheet plus a technical review call before you commit
- Financing routes discussed separately — ColdMatch is not a lender
What moves the price
Cost per m³ swings widely between offers. These are the variables that explain almost all of it.
- Temperature class and pull-down time required
- Refrigerant choice: ammonia, CO2, HFO or propane
- Insulation thickness, envelope quality, doors and dock sealing
- Redundancy level and backup power scope
- Automation, racking and materials handling
- Country labour rates, civil works and delivery terms
Who this is for and how ColdMatch works
Best for
Commercial and industrial cold chain projects, typically from USD 250,000 upward: cold rooms, refrigerated warehouses, blast freezers, processing plant refrigeration and distribution hubs.
Not a fit: domestic refrigerators, household or office air conditioning, small repair call-outs, or spare-parts-only enquiries.
Typical cold chain project types
- Fruit, vegetable and horticulture cold storage with pre-cooling
- Meat, poultry and fish chilling plus blast freezing
- Dairy and beverage process cooling
- Pharma and vaccine GDP cold chain (2–8 °C, −20 °C, −70 °C)
- Refrigerated warehouses, 3PL hubs and mobile cold rooms
Cold room vs refrigerated warehouse
A cold room is a single insulated chamber, usually under ~500 m³, serving one process or storage step. A refrigerated warehouse is a multi-zone facility with racking, docks, air locks and a central refrigeration plant, sized by pallet positions and daily throughput rather than by room volume.
What affects project cost
- Storage volume, pallet positions and daily throughput
- Target temperature and ambient design conditions
- Refrigerant choice (NH₃, CO₂, HFC) and plant redundancy
- Panel thickness, doors, air locks and civil works
- Backup power, solar, freight, duties and commissioning
Temperature range checklist
- +12 to +16 °C — bananas, potatoes, curing
- +2 to +8 °C — pharma GDP, dairy, fresh produce
- 0 to +4 °C — meat, fish and chilled distribution
- −18 to −25 °C — frozen storage
- −35 to −40 °C — blast freezing and IQF
RFQ checklist
- Product, temperature and daily intake
- Room dimensions or required pallet positions
- Site location, ambient conditions and power supply
- Backup autonomy and redundancy level
- Budget range, timeline and scope exclusions
Supplier matching process
You define the project once — capacity, temperature and technical requirements. ColdMatch structures it into a supplier-ready RFQ, reviews it with a human specialist, then approaches suitable refrigeration manufacturers, EPC contractors and installers. Offers come back normalised so scope, price and lead time are comparable.
Buyer is not charged
Using ColdMatch to scope a project, run calculators and receive supplier quotations is free for buyers. ColdMatch helps buyers compare suppliers and request quotes; it is an intermediary and does not manufacture equipment, install systems, or provide financing directly. Costs shown are indicative planning figures — only supplier quotations are binding.
Cold chain project types, temperatures and budgets
Use these reference clusters to place a project before contacting suppliers. Figures are indicative planning ranges for commercial and industrial projects from USD 250,000 upward — only supplier quotations are binding.
Project type cluster
- Agriculture and horticulture cold storage
- Pre-cooling plus storage for fruit, vegetables and flowers, usually +2 to +12 °C with high humidity control and fast pull-down after harvest. Sized by daily intake in tonnes, not only by room volume.
- Meat, poultry and fish cold storage
- Chilling at 0 to +4 °C combined with blast freezing at −35 to −40 °C and frozen holding at −18 to −25 °C. Hygienic panels, drainage and separate dirty/clean flows are part of scope.
- Pharmaceutical and API cold storage
- GDP-compliant 2–8 °C rooms, −20 °C and, for some active pharmaceutical ingredients and biologics, −70 °C. Requires mapping, IQ/OQ/PQ, N+1 refrigeration, backup power and alarm escalation.
- Refrigerated warehouse and 3PL distribution
- Multi-zone facilities sized by pallet positions, dock doors and daily throughput. Typical scope covers racking, air locks, dock levellers, a central plant and an energy strategy.
- Food processing plant refrigeration
- Process cooling, chillers, spiral or tunnel freezers and glycol loops integrated with production lines. Usually specified alongside ISO 22000 and HACCP food safety requirements.
- Mobile and containerised cold rooms
- Plug-and-play 20 ft or 40 ft refrigerated units for seasonal peaks, remote sites and temporary capacity, typically −25 to +8 °C with optional solar or generator support.
Temperature range cluster
| Range | Typical use |
|---|---|
| +12 to +16 °C | Bananas, potatoes, onions, curing and ripening rooms |
| +8 to +12 °C | Tropical fruit and chill-sensitive produce |
| +2 to +8 °C | Pharma GDP storage, vaccines, dairy, fresh produce |
| 0 to +4 °C | Meat, fish and chilled distribution |
| −18 to −25 °C | Frozen food storage and frozen distribution hubs |
| −35 to −40 °C | Blast freezing, IQF tunnels and spiral freezers |
| −70 °C and below | Biologics, clinical trial material and ultra-low pharma |
Budget band cluster
- USD 250K – 750K
- Single or twin cold rooms, a small blast freezer, or a containerised installation with basic backup power.
- USD 750K – 2M
- Multi-zone cold store of roughly 500–1,500 m² with racking, dock doors, a packaged plant and a generator.
- USD 2M – 8M
- Refrigerated warehouse or processing plant refrigeration with NH₃ or CO₂ central plant, redundancy and automation.
- USD 8M – 100M+
- Turnkey distribution hubs, national cold chain programmes and multi-site pharma or export infrastructure.
Plan the numbers before you send an RFQ
The reference pages buyers use most before requesting quotes.
Frequently asked questions
How ColdMatch Group works — independent B2B procurement and sourcing platform — ColdMatch Group is an independent B2B procurement and sourcing platform for industrial refrigeration, cold storage and cold-chain projects from USD $250K+, connecting buyers with qualified third-party suppliers, EPC contractors and independent financing providers.