Cold storage & refrigeration RFQ — Sierra Leone
Send the project details you already have. ColdMatch structures the brief for your Freetown or upcountry site — including power, ice and first-mile handling — before any supplier is approached.
Reference project figures — Sierra Leone
Modelled with the same audited engineering assumptions as the ColdMatch cold storage calculator: design climate for Sierra Leone and an indicative industrial tariff of USD 0.20/kWh. Refrigeration duty is thermal kW, energy is annual kWh at a 0.55 load factor, and CAPEX is the installed volume-based cost (envelope, plant, evaporators, installation, controls and electrical work) — it is not scaled from the duty figure.
| Reference project | Refrigeration duty | Annual energy | Energy cost / yr | Installed CAPEX | USD / m³ |
|---|---|---|---|---|---|
| Chilled room 400 m³ (+2 to +8 °C) | 9 kW | 13 MWh | USD 2,640 | USD 175,000 | USD 438 |
| Frozen store 1,500 m³ (−18 to −25 °C) | 71.3 kW | 183 MWh | USD 36,601 | USD 656,250 | USD 438 |
| Blast freezer 600 m³ (−35 to −40 °C) | 71.3 kW | 151 MWh | USD 30,165 | USD 495,000 | USD 825 |
Indicative planning bands only — not an engineering design, tariff quotation or supplier offer. Your own capacity, product, site and power situation move these numbers; send the RFQ below and a specialist works them through by hand.
Send your Sierra Leone project requirements
Short form — the details you already have are enough. A specialist reviews every brief by hand and replies by email. Nothing is shared with manufacturers before that review.
What changes the price in Sierra Leone
- Freetown port clearance and inland haulage to Bo or Kenema drive landed cost — state the delivery point.
- Artisanal fisheries usually need flake ice and chill rooms at the landing site before freezing capacity is justified.
- Vaccine and medical cold chain requires validated 2–8 °C storage with continuous temperature monitoring.
- High humidity and 32–35 °C ambients change condenser sizing and door protection.
Useful next pages
You submit one RFQ. Our team handles the supplier outreach.
There is no direct buyer-to-supplier connection. Your request comes to the ColdMatch team, which contacts suitable suppliers and manufacturers on your behalf. Supplier and manufacturer information on this site is for research only; it is not a contact directory and does not mean a supplier has been vetted.
- You build your project and submit an RFQ.
- The ColdMatch team validates and organizes the requirements.
- We contact suitable suppliers and manufacturers for you.
- We present their organized responses to you through ColdMatch.
Supplier and manufacturer information is provided for research only; it is not a directory for direct contact. There is no direct buyer-to-supplier connection: every RFQ comes to the ColdMatch team, which validates it, contacts suitable suppliers on the buyer's behalf and presents organized responses through ColdMatch.
Sierra Leone cold chain RFQ — questions buyers ask
What does a cold room cost in Sierra Leone?
As a planning range, a small to mid-size chilled room is typically USD 220–360 per m³ installed and a frozen room USD 300–480 per m³, before civil works and standby power. Imported equipment usually adds 15–25% for freight and clearing.
Can you support fisheries and ice plants?
Yes — flake and block ice plants at landing sites, insulated boxes for first-mile handling, chill and freezer rooms, and reefer transport to Freetown for distribution or export.
What happens after I send the RFQ for a Sierra Leone project?
A ColdMatch specialist reads the brief by hand, checks the design basis — capacity, temperature bands, site location, power situation, timeline and budget — and comes back by email with the open questions. Only after that review do we research suppliers. Nothing is sent to a manufacturer automatically and ColdMatch is not an open marketplace.
Can ColdMatch finance a cold storage project in Sierra Leone?
No. ColdMatch Group does not lend and does not give financial advice. Qualified projects can be introduced to independent financing partners — equipment leasing, ECA-backed supplier credit on imported refrigeration and DFI or blended structures. Every approval decision rests with the lender.
What project size does ColdMatch work on?
Commercial and industrial projects from roughly USD 250,000 upwards: cold storage warehouses, blast freezers and IQF tunnels, ammonia and CO₂ plants, ice plants, GDP pharma stores and turnkey EPC builds. Smaller enquiries are still answered, but supplier research is prioritised above that threshold.
ColdMatch Group is not a lender, bank, financial institution, credit provider, investment advisor or regulated financial services provider. Financing requests submitted through this platform may, subject to user consent, be shared with independent third-party financing providers for evaluation purposes. Any financing approval, terms, pricing, underwriting, due diligence and contractual arrangements are determined solely by the financing provider. Financing is not guaranteed and remains subject to eligibility, compliance checks and lender approval. Neither ColdMatch Group nor its parent, Global B2B Group, provides loans, credit or financial advice; qualified projects may only be introduced to independent financing providers.