Cold storage & freezing RFQ — Madagascar
Most Madagascar projects are export-driven: shrimp, tuna, vanilla and lychee. Send the throughput and product and ColdMatch builds the freezing and storage brief around the export standard you have to meet.
Reference project figures — Madagascar
Modelled with the same audited engineering assumptions as the ColdMatch cold storage calculator: design climate for Madagascar and an indicative industrial tariff of USD 0.15/kWh. Refrigeration duty is thermal kW, energy is annual kWh at a 0.55 load factor, and CAPEX is the installed volume-based cost (envelope, plant, evaporators, installation, controls and electrical work) — it is not scaled from the duty figure.
| Reference project | Refrigeration duty | Annual energy | Energy cost / yr | Installed CAPEX | USD / m³ |
|---|---|---|---|---|---|
| Chilled room 400 m³ (+2 to +8 °C) | 9 kW | 13 MWh | USD 1,980 | USD 175,000 | USD 438 |
| Frozen store 1,500 m³ (−18 to −25 °C) | 71.3 kW | 183 MWh | USD 27,450 | USD 656,250 | USD 438 |
| Blast freezer 600 m³ (−35 to −40 °C) | 71.3 kW | 151 MWh | USD 22,624 | USD 495,000 | USD 825 |
Indicative planning bands only — not an engineering design, tariff quotation or supplier offer. Your own capacity, product, site and power situation move these numbers; send the RFQ below and a specialist works them through by hand.
Send your Madagascar project requirements
Short form — the details you already have are enough. A specialist reviews every brief by hand and replies by email. Nothing is shared with manufacturers before that review.
What changes the price in Madagascar
- EU-approved seafood export lines drive hygienic design, traceability and temperature-record requirements.
- IQF versus plate versus blast freezing changes both capex and the yield on shrimp and fish — decide by product, not by price.
- Port routing via Toamasina and cyclone-season structural design affect both cost and programme.
- Grid supply is unreliable in most industrial zones; generator or hybrid backup is part of the base scope.
Useful next pages
You submit one RFQ. Our team handles the supplier outreach.
There is no direct buyer-to-supplier connection. Your request comes to the ColdMatch team, which contacts suitable suppliers and manufacturers on your behalf. Supplier and manufacturer information on this site is for research only; it is not a contact directory and does not mean a supplier has been vetted.
- You build your project and submit an RFQ.
- The ColdMatch team validates and organizes the requirements.
- We contact suitable suppliers and manufacturers for you.
- We present their organized responses to you through ColdMatch.
Supplier and manufacturer information is provided for research only; it is not a directory for direct contact. There is no direct buyer-to-supplier connection: every RFQ comes to the ColdMatch team, which validates it, contacts suitable suppliers on the buyer's behalf and presents organized responses through ColdMatch.
Madagascar cold chain RFQ — questions buyers ask
What freezing capacity should a Madagascar seafood plant specify?
Size the freezer against peak daily landings, not the annual average. A typical shrimp or tuna line pairs a blast or IQF tunnel sized for the peak day with a −25 °C holding store covering 10–20 days of production, plus ice capacity for first-mile handling.
Which regions are covered?
Antananarivo for distribution and pharma, Toamasina for export and port logistics, Mahajanga, Antsiranana and Toliara for fisheries, shrimp and aquaculture, plus vanilla and lychee pre-cooling in the SAVA region.
What happens after I send the RFQ for a Madagascar project?
A ColdMatch specialist reads the brief by hand, checks the design basis — capacity, temperature bands, site location, power situation, timeline and budget — and comes back by email with the open questions. Only after that review do we research suppliers. Nothing is sent to a manufacturer automatically and ColdMatch is not an open marketplace.
Can ColdMatch finance a cold storage project in Madagascar?
No. ColdMatch Group does not lend and does not give financial advice. Qualified projects can be introduced to independent financing partners — equipment leasing, ECA-backed supplier credit on imported refrigeration and DFI or blended structures. Every approval decision rests with the lender.
What project size does ColdMatch work on?
Commercial and industrial projects from roughly USD 250,000 upwards: cold storage warehouses, blast freezers and IQF tunnels, ammonia and CO₂ plants, ice plants, GDP pharma stores and turnkey EPC builds. Smaller enquiries are still answered, but supplier research is prioritised above that threshold.
ColdMatch Group is not a lender, bank, financial institution, credit provider, investment advisor or regulated financial services provider. Financing requests submitted through this platform may, subject to user consent, be shared with independent third-party financing providers for evaluation purposes. Any financing approval, terms, pricing, underwriting, due diligence and contractual arrangements are determined solely by the financing provider. Financing is not guaranteed and remains subject to eligibility, compliance checks and lender approval. Neither ColdMatch Group nor its parent, Global B2B Group, provides loans, credit or financial advice; qualified projects may only be introduced to independent financing providers.